Useful iPhone Tips and Tricks

Turn On Voice Control

  • Go to Settings.
  • Touch Accessibility.
  • Touch Voice Control.
  • Switch Voice Control on. Since Voice Control is active, a blue microphone icon pops up together with the clock in the upper left. This means Voice Control is on and continually tuning in for commands.
  • Now, you can begin utilizing Voice Control; you presumably don’t realize what commands are accessible to you. For an outline of what you can say and do, tap Customize Commands. There are many, numerous commands, and they’re each split up into classifications. Tapping one will show all of you the acknowledged phrases that will trigger a particular action.
  • You can likewise include commands, utilizing the Create New Commands option inside the Customize Commands page. To create a command Voice Control will notice, you’ll need to indicate the type of the action and the application where it is to be used before you work out the command itself.
  • If you only need Voice Control to listen when you’re staring at your phone, switch on the Attention Aware setting on the main Voice Control screen. At the point when your phone notices you’re not staring any longer it, Voice Control will be switched to sleep; however, to use Voice Control without staring at your device, you’ll need to say “Wake Up” before proceeding to your command.
  • All things considered, there are two commands specifically you should be open to using: “Show Grid” and “Show Numbers.” These commands will enable you to connect with anything on your iPhone’s screen, regardless of whether there’s no default phrase for what you’re attempting to perform with Voice Control.

How to Block Email Senders

  • First, ensure the email address you desire to block is linked to a contact in your phone.
  • Proceed to block the contact by touching their name and choosing theBlock this Calleroption.
  • Next, open the Settings app.
  • Tap Mail.
  • From here, below the Threading header, touch theBlocked Sender Options.
  • Lastly, tap Move to Trash.

Unblock a Number on iPhone

  • Go to Settings > Phone or launch Settings > FaceTime.
  • Touch Call Blocking & Identification.
  • While on the Blocked Contacts list, swipe right to left through the number, then touch Unblock.

Unblock People Who Text You

  • If you had blocked someone in Messages, you could unblock the number in the Messages app to enable them to text you again.
  • Go to Settings
  • Tap Messages.
  • Scroll down and tap Blocked.
  • Swipe from right to left on the number you wish to unblock and then tap Unblock.

How to Add Contacts on iPhone

  • Launch the Phone app.
  • Touch Contacts.
  • Touch the”+” icon situated at the top right-hand corner of the display.
  • Input the details into the fields for the First Name and Last Name, respectively.
  • Tap on Add Phone, and afterward enter the contact phone number.
  • Tap on Add Email, and afterward type in the contact email address. 
  • Touch “Done” to save.
  • Navigate or search the name on the Contacts to check if it was effectively saved. If you wish to add more contacts, simply follow the same process.

Set Up Voicemail on your iPhone

  • Launch the Phone app.
  • From the base of the phone window, there’s the Voicemail icon in the right corner. Touch it to launch your visual voicemail.
  • The resultingscreenwilldisplay a blank space with a button to Set up now in the center of the screen; choose this. If you have used iPhone’s voicemail service previously, you can sign in with your old password here to automatically access your old voicemails. If you have never made use of visual voicemail, you should create a password and re-enter it. Whenever completed, select “Done.”
  • Now your iPhone will show the Greeting screen. If you don’t fancy the greeting, you can choose Default and afterward “Done” to skip this part. If you need to personalize your greeting, select Custom, and then Record to record your greeting and Play to repeat it. Afterwards, tap “Done.”
  • Your iPhone voicemail is currently officially set up.

How to Merge Duplicate iPhone Contacts

  • To merge duplicate contacts, simply open a contact and tap on the “Edit” button.
  • Next, select the “Link contacts” option. This will open your contacts list. Simply select the contacts you wish to merge with the current one. That’s all!

Copy Contacts from Social Networks & Email

  • Launch the Settings app.
  • Tap Passwords & Accounts.
  • Choose a social network or an email account
  • Touch the pointer next to “Contacts” to turn on the function.
  • Slide your finger up, starting from the base of the screen to return to the home screen.

Set Up Emergency Medical ID

  • Open the Health app.
  • From here, touch “Medical ID.”
  • Next, tap on “Create Medical ID” to start adding your health info.
  • On the following screen, enter all your medical information, including allergies, well-being conditions, emergency contact details, and any helpful notes. This will be valuable if there’s an occurrence of an emergency, and anyone around you can rapidly access this information.
  • After you are done with adding the details, switch ON “Show When Locked.” This feature is optional yet exceptionally recommended. The reason is that all the info you have entered will be noticeable to others regardless of whether your iPhone is encrypted.
  • That is all; you would now be able to leave the Health app and lock your iPhone. You can confirm if it’s functioning or not by moving to the Passcode screen; from here, tapEmergency and then touchMedical ID.

How to Use Apple’s Measure App

  • Launch the Measure app.
  • Ensure Measure is highlighted at the bottom of your screen.
  • There’ll be directions on the screen to move your iPhone to Start; once you do this, you’ll see a white dot and a plus sign popup.
  • Place the white dot on the place you’d like to begin your measurement and touch the plus sign, then transfer your phone to the point where you want to discontinue measuring and tap the plus again; you’ll see a yellow dotted line as you move your device.
  • If you want to measure from the endpoint of your last measured line, touch the plus sign while the white point is over the previous endpoint, then move your device once more to create a fresh measurement as before.
  • To take a photo of your concluded measurement, touch the shutter release button to the right of the plus sign.
  • From here, you can take measurements on your device.

How to View the Weather in Maps

  • Open Maps from the Home screen.
  • Long press on the weather button in the bottom right.

Measure Dimensions with iPhone

The Measure app and your device camera can be used to measure nearby objects; you can configure the start and endpoints of measurement by yourself, and your device will automatically identify the dimensions of the objects and other surfaces.

For perfect results, use Measure on well-defined entities located between 0.5 and 3 meters on the iPhone.

Note: measurements are approximate.

Start a Measurement

  • Launch Measure, and then use the iPhone camera to gently scan close items.
  • Place your device so that the item you wish to measure shows on the screen.
  • When you use the feature, a green dot will display at the top of the display to signify that your camera is in use.

Take an automatic rectangle measurement

  • When your device senses the edges of a rectangular entity, click the box to view the dimensions.
  • To shoot a picture of your measurement, click on the Take Picture button.

Take a Manual Measurement

  • Position the dot in the middle of the display with the spotyou intend to begin your measurement, and then click the Add button.
  • Gently pan your device to the end spot, and then click the Add button to view the measured length.
  • To snap a picture of your measurement, click on the Take Picture button.
  • Take an additional measurement, or click on Clear to beginagain.

Use Edge Guides

You can conveniently and accurately measure the heights and straight edges of cabinets and other items and objects with the aid of guidelines that displays automatically.

  • Place the dot in the middle of the display along the straight edge of an object until a guide pops up.
  • Click on the Add button where you intend to start measuring.
  • Gently move along the guide, then click the Add button at the endpoint to view the measured length.
  • To take an image of your measurement, click on the Take Picture button.

Use Ruler View

  • After you’ve taken measurement of the distance between two points, move yourdevice closer to the measurement stripe until it switches into a ruler that displays incremental inches and feet.
  • Tap the Take Picture button to take a photo of your measurement.

View and Save Measurements

You can save a list of all the measurements you take in a single session along with screenshots so that you can easily share and access them when you need them.

  • Click on the History button to view a rundown of recent measurements.
  • Move up from the top of the rundown to view additional measurements.
  • Lastly, to save the measurements, tapCopy, launcha new app, tap in a document, and tapPaste.

Measure a Person’s Height

With the “Measure” app, you can instantly measure a person’s height from the floor to the top of their head.

  • Place your device so that the individual you wish to measure displays on the screen from head to their feet.
  • A line shows at the upper part of their head, with the height measurement displaying just under the line.
  • To snap an image of your measurement, click the Take Picture button.
  • To save the image, click the screenshot in the bottom-left side
  • Next, click Done.
  • From here, selectSave to Photos or Save to Files.

Leave a Comment

Your email address will not be published. Required fields are marked *

Pin It on Pinterest

Share This